P/S Pump Removal And Installation: Installation

WARNING: This page is about a different car, the 2008 Suzuki Grand Vitara, 2007 Suzuki Grand Vitara, and 2006 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Reverse removal procedure, and then noting the following instructions.

NOTE:

Adjust P/S pump drive belt referring to P/S PUMP AND A/C COMPRESSOR (IF EQUIPPED) DRIVE BELT INSPECTION AND ADJUSTMENT .
Fill specified power steering fluid after installation and bleed air without failure. (Refer to P/S SYSTEM AIR BLEEDING PROCEDURE ).

Tightening torque

P/S pump mounting bolt: 25 N.m (2.5 kg-m, 18.0 lb-ft)

P/S pump high pressure pipe union bolt: 60 N.m (6.0 kg-m, 43.5 lb-ft)