Tightening Torque Specifications
CAUTION:
For fastener with * (asterisk) below, be sure to tighten it according to specified procedure in "Repair Instructions".
TIGHTENING TORQUE SPECIFICATIONS
| Fastening part | Tightening torque | ||
|---|---|---|---|
| N.m | kgf-m | lbf-ft | |
| Brake pipe flare nut for M10 | 16 | 1.6 | 12.0 |
| Brake pipe flare nut for M12 | 19 | 1.9 | 14.0 |
| ABS (ESP®) hydraulic unit/control module assembly bolt | 9 | 0.9 | 7.0 |
| ABS (ESP®) hydraulic unit/control module assembly bracket bolt | 25 | 2.5 | 18.5 |
| ABS (ESP®) hydraulic unit/control module assembly bracket nut | 25 | 2.5 | 18.5 |
| Front wheel speed sensor bolt | 11 | 1.1 | 8.5 |
| Front wheel speed sensor harness clamp bolt | 11 | 1.1 | 8.5 |
| Rear wheel speed sensor bolt | 11 | 1.1 | 8.5 |
| Rear wheel speed sensor harness clamp bolt | 11 | 1.1 | 8.5 |
NOTE:
The specified tightening torque is also described in the following.
ABS (ESP®) HYDRAULIC UNIT/CONTROL MODULE ASSEMBLY REMOVAL AND INSTALLATION
ABS (ESP®) HYDRAULIC UNIT/CONTROL MODULE ASSEMBLY REMOVAL AND INSTALLATION
Reference:
For the tightening torque of fastener not specified in this section, refer to FASTENER INFORMATION .