Intake Manifold

Intake Manifold bolts
Tighten intake manifold bolts (No.1 and No.2) to 10 Nm (1.0 kgf-m, 7.5 lbf-ft) in numerical order ("1" - "6") shown in figure evenly and gradually.





Tighten intake manifold bolts (No.1, No.2 and No.3) to 25 Nm (2.5 kgf-m, 18.5 lbf-ft) in numerical order ("1" - "8") shown in figure evenly and gradually.