Overdrive (Case Side) Inspection

Overdrive (Case Side) Inspection
^ Measure free length of piston return spring.

Standard free length of O/D brake piston return spring
15.10 mm (0.594 in.)





^ Check that sliding surface of discs and plate are not worn or burnt. If necessary, replace therm.


NOTE:
^ If disc lining is exfoliated, discolored or worn hardly, replace all discs.
^ If only a part of printed numbers is corroded, replace all discs.
^ Before assembling new discs, soak them in A/T fluid for at least 2 hours.