Grounding Point: Application and ID

Reassembling Note for Wiring Harness

Refer to Around Engine
Refer to Around Battery
Refer to Around Strut
Refer to Around Dash Panel (Interior)
Refer to Instrument Panel Harness
Refer to Instrument Panel Harness / Floor Harness (Dash Side Panel)
Refer to Floor Harness
Refer to Rear End Door Harness
Refer to Fuel Pump Wire

Ground Bolt Used on Painted Panels
The bolts are specially designed to get good metal-to-metal contact on painted panels.
Be sure to use the specified ground bolt.
Using an ordinary bolt can cause poor grounding on painted panels.

CAUTION: Using this bolt on aluminum blocks will damage the screw hole of the block. Never use this bolt on aluminum blocks.

NOTE: This ground bolt is not used on the engine block, the transmission case or the steering column mounting bracket (non-painted). Identify the bolt with the paint-scratch shape (1) on the screw.