System Specifications

Timing Cover
Tighten timing chain cover bolt to 20 Nm (2.0 kgf-m, 15.0 lbf-ft) in numerical order ("1" - "22") shown in figure evenly and gradually.
In the same manner as Step a), retighten them to 60 degrees.

Crankshaft Pulley
Tighten crankshaft pulley bolt to 120 Nm (12.2 kgf-m, 88.5 lbf-ft).
Loosen crankshaft pulley bolt until loosening torque is 0.
Tighten crankshaft pulley bolt to 100 Nm (10.2 kgf-m, 74.0 lbf-ft).
Retighten crankshaft pulley bolt to 150 degrees.

Timing chain tensioner No.1 bolt 23 N-m (2.3 kgf-m, 17.0 lbf-ft)
Timing chain tensioner No.2 bolt 23 N-m (2.3 kgf-m, 17.0 lbf-ft)
Timing chain tensioner adjuster No.1 bolt 23 N-m (2.3 kgf-m, 17.0 lbf-ft)
Timing chain tensioner adjuster No.2 bolt 23 N-m (2.3 kgf-m, 17.0 lbf-ft)
Timing chain tensioner adjuster No.3 bolt 23 N-m (2.3 kgf-m, 17.0 lbf-ft)