Connecting Rod, Engine

Connecting Rod bolts
Tighten all connecting rod bearing cap bolt to 15 Nm (1.5 kgf-m, 11.0 lbf-ft) evenly and gradually.
In the same manner as Step c), retighten them to 45 degrees.
In the same manner as Step c), retighten them to 45 degrees.

Connecting rod alignment
Limit on bow: 0.05 mm (0.0019 in.)
Limit on twist: 0.10 mm (0.0039 in.)

Connecting Rod
Big-end side clearance
Standard: 0.25 - 0.40 mm (0.0099 - 0.0157 in.)

Connecting rod big-end inside diameter
Stamped number 1 53.0000 - 53.0060 mm (2.08662 - 2.08685 in.)
Stamped number 2 53.0061 - 53.0120 mm (2.08686 - 2.08708 in.)
Stamped number 3 53.0121 - 53.0180 mm (2.08710 - 2.08732 in.)