Active Test

TEST ITEM DESCRIPTION CHART

Test Item	Description
RETAINED PWR	This test is able to supply RAP signal (power) from BCM (body control module) to power window system and power sunroof system (if equipped). Those systems can be operated when turning on "RETAINED PWR" on SDT screen even if the ignition switch is turned OFF. NOTE: During this test, SDT can be operated with ignition switch in OFF position. "RETAINED PWR" should be turned "ON" or "OFF" on SDT screen when ignition switch is ON. Then turn ignition switch OFF to check retained power operation. SDT might be stuck if "RETAINED PWR" is turned "ON" or "OFF" on SDT screen when ignition switch is OFF.

Test Item

Description

RETAINED PWR

This test is able to supply RAP signal (power) from BCM (body control module) to power window system and power sunroof system (if equipped). Those systems can be operated when turning on "RETAINED PWR" on SDT screen even if the ignition switch is turned OFF.

NOTE: During this test, SDT can be operated with ignition switch in OFF position. "RETAINED PWR" should be turned "ON" or "OFF" on SDT screen when ignition switch is ON. Then turn ignition switch OFF to check retained power operation. SDT might be stuck if "RETAINED PWR" is turned "ON" or "OFF" on SDT screen when ignition switch is OFF.