How to Display Permanent DTC Status: Notes
WARNING: This page is about a different variant/trim than selected.
With SDT
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Select "System readiness test results" in "Engine (GST Mode) Utility" with SDT.
With GST
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Turn ignition switch OFF and wait at least 10 seconds.
- Turn ignition switch ON.
- Select Service $0A with GST (Generic Scan Tool).