Intake Manifold
- If stud bolts were removed from cylinder head, install them and tighten to the specified torque.
Intake manifold studs: 11.0 N.m (1.1kg-m, 8 ft-lb)
- Tighten all nuts and bolts to the specified torque in two or more steps in numerical order as shown.
Intake manifold bolt and nuts 1st step: 7.4 N.m (0.75 kg-m, 65 in-lb)
2nd step and after: 29.0 N.m (3.0 kg-m, 21 ft-lb)