Remote Keyless Entry Receiver: Removal and Installation: Removal

Remove the front pillar upper finisher (RH). Refer to [BODY SIDE TRIM: COMPONENT ]
Remove the side ventilator grille (RH). Refer to [INSTRUMENT PANEL ASSEMBLY: EXPLODED VIEW ]
Remove the upper glove box. Refer to [INSTRUMENT PANEL ASSEMBLY: EXPLODED VIEW ]
Remove cluster lid D. Refer to [INSTRUMENT PANEL ASSEMBLY: EXPLODED VIEW ]
Remove the bolt (A), disconnect the harness connector (1) and remove the remote keyless entry receiver (2).

Fig 1: Identifying Harness Connector, Remote Keyless Entry Receiver And Bolt
Courtesy of SUZUKI OF AMERICA CORP.

Installation is in the reverse order of removal.