LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2010 >> Equator Base, 4D Pickup Extra Cab >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission/Transaxle) >> Diagnostic information and Procedures >> DTC P0700 Transmission Control >> Diagnosis Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnosis Procedure

WARNING: This page is about a different variant/trim than selected.
DIAGNOSTIC PROCEDURE

Step Action YES NO
1  CHECK DTC 
With SDT 
  1. Turn ignition switch "ON". (Do not start engine.)
  2. Select "DTC check" mode for "AT" with SDT.
  3. Touch "Clear".
  4. Turn ignition switch "OFF" and wait at least 10 seconds.
  5. Perform [DTC P0700 TCM ].

Is the "TCM" displayed again? 		 Replace the control valve with TCM. Refer to [CONTROL VALVE WITH TCM AND A/T FLUID TEMPERATURE SENSOR 2: ON-VEHICLE REPAIR ]. INSPECTION END 
scientia non olet · About LEMON Manuals