Procedure After Replacing ECM

When replacing ECM, the following procedure must be performed.

1. Perform initialization of immobilizer system and registration of all immobilizer system ignition key IDs. Refer to [ECM RE-COMMUNICATING FUNCTION: SPECIAL REPAIR REQUIREMENT ]
2. Perform "VIN Registration" in VIN Registration  .
3. Perform "Accelerator Pedal Released Position Learning" in Accelerator Pedal Released Position Learning  .
4. Perform "Throttle Valve Closed Position Learning" in Throttle Valve Closed Position Learning  .
5. Perform "Idle Air Volume Learning" in Idle Air Volume Learning  .