Trouble Diagnosis Without SDT
Trouble Diagnosis without SDTDiagnostic Procedure 6
Inspect SRS Malfunction Using "AIR BAG" Warning Lamp-Diagnosis Mode
NOTE: SRS will not enter Diagnosis mode if no malfunction is detected in User mode.
1. Turn ignition switch ON.
2. After "AIR BAG" warning lamp lights for 7 seconds, turn ignition switch OFF within 1 second.
3. Wait more than 3 seconds.
4. Repeat steps 1 to 3 two more times (3 times total).
5. Turn ignition switch ON.
SRS is now in Diagnosis mode. Refer to [Diagnosis Sensor Unit: Trouble Diagnosis without SDT]. Trouble Diagnosis Without SDT