Removal Procedure

Fig 1: Identifying Rear Exhaust Manifold Heat Shield Bolts

Courtesy of SUZUKI OF AMERICA CORP.

Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
Remove the rear exhaust manifold heat shield bolts and shield.
Remove the right catalytic converter. Refer to CATALYTIC CONVERTER REPLACEMENT - RIGHT SIDE .

Fig 2: Identifying Engine Wiring Harness Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the engine wiring harness electrical connector (2) from the bank 1 knock sensor.

Fig 3: Identifying Knock Sensor Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Loosen the knock sensor bolt and remove the knock sensor.