April 5, 2026: LEMON Manuals is launched! Read the announcement.

Channel Plate and Upper Channel Plate Assemble

Fig 1: Identifying Channel Plate And Upper Channel Plate

G06490378

Courtesy of SUZUKI OF AMERICA CORP.

Channel Plate and Upper Channel Plate Assemble

COMPONENT NAME REFERENCE

Callout	Component Name
1	Control Valve Channel Upper Plate Assembly Tip: Inspect the upper channel plate bolt pass through holes for damage or burnelling. Any damage near the PCS feed holes could cause leaking around the PCS switch seal. Replace as necessary.
2	Control Valve Body Bolt M6 x 35 (Qty: 3) CAUTION: Refer to FASTENER NOTICE . Procedure Hand tighten for alignment, then tighten in sequence, after all bolts are installed. Tightening torque 12 N.m (9 lb ft)
3	Control Valve Body Bolt M6 x 65 (Qty: 5) Procedure Tighten in sequence. Tightening torque 12 N.m (9 lb ft)
4	Control Valve Body Bolt M6 x 55 (Qty: 2) Procedure Tighten in sequence. Tightening torque 12 N.m (9 lb ft)

Reference: CONTROL VALVE BODY ASSEMBLY INSTALLATION