Removal Procedure

Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
Remove the rear tire and wheel assembly. Refer to REMOVAL PROCEDURE .

Fig 1: Identifying Stabilizer Shaft Clamp Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Loosen the stabilizer shaft clamp bolts.

Fig 2: Identifying Stabilizer Link To Stabilizer Link To Stabilizer Shaft Nut
Courtesy of SUZUKI OF AMERICA CORP.

NOTE: Use a 90 degree bend TORX® bit to hold the ball stud when loosening or tightening the nut.
Remove the stabilizer link to stabilizer shaft nut.

Fig 3: Identifying Stabilizer Link To Lower Control Arm Nut
Courtesy of SUZUKI OF AMERICA CORP.

NOTE: When disconnecting the stabilizer link, hold the link with a wrench to prevent turning.
Remove the stabilizer link to lower control arm nut.
Remove the stabilizer link from the vehicle.