LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> XL7 Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Lighting Systems) >> Diagnostic Information and Procedures >> Park Lamps Malfunction >> Circuit/System Testing >> Headlamp Switch Circuit Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Headlamp Switch Circuit Test

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the X1 harness connector at the turn signal/multifuncition switch.
  2. Ignition OFF, verify that a test lamp illuminates between the ground circuit terminal 1 and B+.
    • If the test lamp does not illuminate, test the ground circuit for an open/high resistance.
  3. Ignition ON, verify the scan tool BCM Parklamp Switch parameter is Inactive.
    • If not the specified value, test the signal circuit terminal 3 for a short to ground. If the circuit tests normal, replace the BCM.
  4. Install a 3A fused jumper wire between the signal circuit terminal 3 and ground. Verify the scan tool Parklamp Switch parameter is Active.
    • If not the specified value, test the signal circuit for a short to voltage or and open/high resistance. If the circuit tests normal, replace the BCM.
  5. If all circuits test normal, test or replace the turn signal/multifuncition switch.
scientia non olet · About LEMON Manuals