Circuit/System Verification

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, individually operate both the left and right turn signals. All applicable lamps should flash when in each turn signal position.
- If any of the lamps do not flash, refer to TURN SIGNAL LAMPS AND/OR INDICATORS MALFUNCTION .
Observe the scan tool Hazard Lamp Switch parameter while cycling the hazard switch. The parameter should change between Active and Inactive.
- If the parameter does not cycle between the specified values, refer to CIRCUIT/SYSTEM TESTING .
Press the hazard switch. All applicable lamps should flash.
- If one or more lamps do not flash, replace the BCM.