Installation Procedure
WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Position the transaxle mount bracket (2) to the transaxle.CAUTION: Refer to FASTENER NOTICE .
- Install the transmission mount bracket bolts (1).
Tightening torque
Tighten the nuts to 55 N.m (41 lb ft).
- Install the left transaxle mount. refer to TRANSMISSION MOUNT REPLACEMENT - LEFT SIDE .
- Install the left engine splash shield. refer to ENGINE SPLASH SHIELD REPLACEMENT - LEFT SIDE .
- Remove the transaxle stand.
- Lower the vehicle.