Third Gear Band Servo Piston Pin Measurement

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: FRONT DIFFERENTIAL TRANSFER DRIVE GEAR ASSEMBLY REMOVAL

Fig 1: Applying Compressed Air To Servo Apply Passage

Courtesy of SUZUKI OF AMERICA CORP.

Mark the servo piston pin in the released position (1).
WARNING: Wear safety glasses when using compressed air in order to prevent eye injury.
Apply compressed air to the servo apply passage (3), and mark the apply position on the piston pin (2).
Measure the distance between the release and apply marks (a). Refer to THIRD GEAR BAND SERVO PISTON PIN SELECTION to select the correct servo piston pin.