Circuit/System Verification
WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Individually open and close each vehicle door while observing the door ajar indicator/message. The indicator/message should accurately transition between the door ajar and door closed state when each door is opened and closed.
- If the door ajar indicator/message does not properly transition when each door is opened and closed, refer to DOOR AJAR INDICATOR MALFUNCTION .
- Open and close the liftgate while observing the liftgate ajar indicator/message. The indicator/message should accurately transition between the liftgate ajar and liftgate closed state when the trunk is opened and closed.
- If the liftgate ajar indicator/message does not properly transition when the liftgate is opened and closed, refer to LIFTGATE AJAR INDICATOR MALFUNCTION .
- Completely lower the driver door window and close all vehicle doors.
- Ignition OFF, arm the CTD system using the keyless entry system by pressing the transmitter LOCK button twice. Verify the scan tool CTD Status parameter displays Armed.
- If not the specified value, refer to KEYLESS ENTRY SYSTEM INOPERATIVE .
- Without disarming the system, reach in through the open driver window, unlock and open the driver door. Verify the scan tool CTD Status parameter displays Alarm Active.
- If not the specified value, replace the BCM.
- With the door open, verify the vehicle horn is pulsing and the exterior lamps are flashing.
- If the horn is not pulsing, refer to HORNS MALFUNCTION .
- If the exterior lights are not flashing, refer to TURN SIGNAL LAMPS AND/OR INDICATORS MALFUNCTION .