Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Underhood Electrical Center Bracket

Courtesy of SUZUKI OF AMERICA CORP.

Remove the underhood electrical center bracket. Refer to UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK BRACKET REPLACEMENT .
Disconnect the brake fluid level indicator switch electrical connector.

Fig 2: Identifying Low Brake Fluid Level Sensor
Courtesy of SUZUKI OF AMERICA CORP.
While simultaneously depressing the retaining tabs on the opposite side of the switch electrical connection, carefully pull the switch from the master cylinder reservoir.
Remove the low brake fluid level sensor.