LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> XL7 Premium, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Heating, Ventilation And A/C) >> Repair Instructions >> Air Inlet Assembly Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Air Inlet Assembly And Screws
G05470558Courtesy of SUZUKI OF AMERICA CORP.
  1. Install the air inlet assembly.
    CAUTION: Refer to FASTENER NOTICE .
  2. Install the air inlet assembly screws.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

    Fig 2: Identifying Recirculation Actuator And Screws
    G05470559Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the recirculation actuator.
  4. Install the recirculation actuator screws.

    Tightening torque 

    Tighten the screws to 1.5 N.m (13 lb in). 

  5. Install the electrical connector to the recirculation actuator.
  6. Install the HVAC module. Refer to HVAC MODULE ASSEMBLY REPLACEMENT .
scientia non olet · About LEMON Manuals