Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Fuel Injector Sight Shield, Engine Wiring Harness Electrical Connector And Ignition Coil

Courtesy of SUZUKI OF AMERICA CORP.

Remove the fuel injector sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .
Disconnect the engine wiring harness electrical connector(s) (1) from the ignition coil(s).

Fig 2: Identifying Ignition Coil Bolt And Ignition Coil
Courtesy of SUZUKI OF AMERICA CORP.
Remove the ignition coil bolt(s).
Remove the ignition coil(s).