Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Wiring Harness Electrical Connector

Courtesy of SUZUKI OF AMERICA CORP.

Remove the air cleaner assembly. Refer to AIR CLEANER ASSEMBLY REPLACEMENT .
Disconnect the engine wiring harness electrical connector (8) from the bank 2 intake camshaft position (CMP) sensor.

Fig 2: Identifying Intake Camshaft Position Sensor Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Remove the CMP sensor bolt.
Remove the CMP sensor.