Valve Rocker Arms Cleaning and Inspection

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: VALVE ROCKER ARM REMOVAL - LEFT SIDE

Reference: VALVE ROCKER ARM REMOVAL - RIGHT SIDE

Fig 1: Inspecting Valve Rocker Arms

Courtesy of SUZUKI OF AMERICA CORP.

Inspect the camshaft follower roller (1) for the following:
- Flat spots
- Excessive scoring and pitting
- Ensure the roller spins freely
Inspect the camshaft follower valve tip area (2).
Inspect the camshaft follower stationary hydraulic lash adjuster (SHLA) pivot area (3).
Replace the camshaft follower or followers as necessary.
Reference: VALVE ROCKER ARM INSTALLATION - RIGHT SIDE

Reference: VALVE ROCKER ARM INSTALLATION - LEFT SIDE