Steering Wheel Control Switch Assembly Replacement

Fig 1: Identifying Steering Wheel Control Switch Assembly And Steering Wheel Trim Cover Bolt

Courtesy of SUZUKI OF AMERICA CORP.

CALLOUT AND COMPONENT NAME DESCRIPTION

Callout	Component Name
WARNING: Refer to SIR CAUTION . Preliminary ProcedureRemove the inflatable restraint steering wheel module. Refer to INFLATABLE RESTRAINT STEERING WHEEL MODULE REPLACEMENT .Tip:  Right hand steering wheel control switch shown. Left hand similar.
1	Steering Wheel Trim Cover Bolt (Qty: 4) CAUTION: Refer to FASTENER NOTICE . Tightening torque  2 N.m (18 lb in)
2	Steering Wheel Trim Cover (Qty: 2)
3	Steering Wheel Control Switch Assembly Screw (Qty: 6) Tip:  DO NOT over tighten the steering wheel control switch screws or damage to the switch(s) or steering wheel covers may occur. Tightening torque  2 N.m (18 lb in)
4	Steering Wheel Control Switch Assembly (Qty: 2) Tip:  Make sure the steering wheel control switch(s) are properly seated to the steering wheel shroud during installation.