Auxiliary Blower Control Module Replacement

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Auxiliary Blower Control Module And Screws

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENT NAME CHART

Callout	Component Name
Preliminary Procedure Remove the left rear trim panel. Refer to REAR QUARTER LOWER TRIM PANEL REPLACEMENT . Remove the 3 auxiliary HVAC module mounting bolts. Refer to AUXILIARY HVAC MODULE REPLACEMENT . Reposition the auxiliary HVAC module inward to gain access to the blower control module. Disconnect the electrical connection.
1	Blower Control Module Screw (Qty: 2). CAUTION: Refer to FASTENER NOTICE . Tightening torque 1.5 N.m (13 lb in)
2	Blower Control Module Tip: The blower control module is mounted on the outboard side of the module.