Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Mount Bracket And Bolts

Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .

Position engine mount in place and install engine mount bracket to engine mount bolt.
Tightening torque

Tighten the bolt to 50 N.m (37 lb ft) .
Install the engine mount to frame bolts (1).
Tightening torque

Tighten the engine mount bolts to 50 N.m (37 lb ft) .
Lower the vehicle.
Remove the engine support. Refer to ENGINE SUPPORT FIXTURE .
Install the air cleaner assembly. Refer to AIR CLEANER ASSEMBLY REPLACEMENT .