Radio Replacement

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Radio Assembly And Screws

Courtesy of SUZUKI OF AMERICA CORP.

CALLOUT AND COMPONENT NAME DESCRIPTION

Callout	Component Name
Preliminary Procedure Remove the instrument panel accessory trim plate. Refer to INSTRUMENT PANEL ACCESSORY TRIM PLATE REPLACEMENT
1	Radio Screw (Qty: 4) Tightening torque 2 N.m (18 lb in)
2	Radio Assembly Procedure Disconnect the antenna and electrical connectors from the rear of the radio. Reprogram the radio after replacement. Refer to CONTROL MODULE REFERENCES