Ignition Switch
- Ignition OFF, disconnect the harness connector at the ignition switch.
- Using the Resistance Test table below, check the resistance between the terminals of the ignition switch listed in each switch position.
Resistance Test
IGNITION SWITCH POSITION AND RESISTANCE SPECIFICATIONIgnition Switch Position Terminals 3 and 1 Terminals 3 and 2 Terminals 3 and 5 Terminals 3 and 4 Terminals 5 and 4 Off Key Out Infinite Infinite Infinite Infinite Infinite Off Key IN Infinite Infinite < 5.0 Ω Infinite Infinite Accessory Infinite < 5.0 Ω Infinite Infinite Infinite Run < 5.0 Ω < 5.0 Ω Infinite Infinite < 5.0 Ω Start < 5.0 Ω Infinite Infinite Infinite 1275-1325 Ω - If any reading is not as specified, replace the ignition switch.