Torque Converter and Differential Housing Installation

Fig 1: Identifying Torque Converter And Differential Housing Installation

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENT NAME REFERENCE

Callout	Component Name
1	Torque Converter Housing Outer Seal
2	Torque Converter and Support and A/Trans Fluid Pump Housing Assembly
3	Torque Converter and Differential Housing Bolts M8 x 35 (Qty: 17) CAUTION: Some bolt torques specifications are different. Over tightening the bolts at the 12, 15 and 17 positions in the sequence could cause damage to the case threads. CAUTION: Refer to FASTENER NOTICE . Procedure:  Tighten in sequence shown. Tightening torque  Bolts 1-11, 13-14 and 16 to 36 N.m (27 lb ft)  Bolts 12, 15 and 17 to 30 N.m (22 lb ft)

Reference: Front Differential Carrier Preliminary Rotational Torque Measurement