Cooler Flow Check and Flushing Steps

1. Machine Set-up
2. Determine Minimum Flow Rate
3. Back Flush
4. Forward Flush
5. Flow Test
6. Code Recording Procedure
7. Clean-up

Special Tools 

• J 45096 Transmission Oil Cooling System Flush and Flow Test Tool
• J 45096-50 Transmission Cooler Flush Adapter
• Shop air supply with water/oil filters, regulator and pressure gage - minimum 90 psi
• Eye protection
• Rubber gloves

For equivalent regional tools, refer to SPECIAL TOOLS - AUTOMATIC TRANSMISSION - 6T70/6T75 .