Rear Seat Back Cushion Latch Cable Replacement

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Rear Seat Back Cushion Latch Cable

Courtesy of SUZUKI OF AMERICA CORP.

COMPONENT NAME CHART

Callout	Component Name
Preliminary Procedures Remove the rear seat. Refer to REAR SEAT REPLACEMENT . Remove the rear seat back cover and pad. Refer to REAR SEAT BACK CUSHION COVER AND PAD REPLACEMENT (60 PERCENT SEAT) or REAR SEAT BACK CUSHION COVER AND PAD REPLACEMENT (40 PERCENT SEAT) .
1	Rear Seat No. 1 Back Release Cables Disconnect the seat back release cables at the inner and outer recliners. The cable secures into place in the seat back panel.