LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> XL7 Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 98 (Seat System) >> Diagnostic Information and Procedures >> Power Seat Inoperative >> Circuit/System Testing >> Seat Horizontal Motor Circuit Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Seat Horizontal Motor Circuit Test

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition OFF, disconnect the harness connector at the seat adjuster switch.
    NOTE: When performing the following tests, make sure that the seat is not all ready in the position the test is attempting to produce.
  2. Install a 30A fused jumper wire between the control terminal B and 12 volts. Momentarily install a jumper wire between the control terminal C and ground. The seat horizontal motor should momentarily perform the FORWARD function.
    • If the function does not perform as specified, replace the seat horizontal motor.
  3. Reverse the polarity of jumper wires; the a seat horizontal motor should perform the REARWARD function.
    • If the function does not perform as specified, replace the seat horizontal motor.
  4. If all circuits test normal, test or replace the seat adjuster switch.
scientia non olet · About LEMON Manuals