Circuit/System Testing

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, verify the SDM Battery Voltage Signal parameter is 9-16 volts.
- If not the specified range, refer to DIAGNOSTIC SYSTEM CHECK - VEHICLE DIAGNOSTIC INFORMATION .
Ignition OFF, monitor the IPC, ignition ON. The SIR warning indicator should flash then turn OFF.
- If the SIR warning indicator continually flashes, program the SDM.
- If the SIR warning indicator remains on steady, test for DTCs and refer to DIAGNOSTIC TROUBLE CODE (DTC) LIST - VEHICLE DIAGNOSTIC INFORMATION . If no DTC is current, proceed to the next step.
Perform the Display Test in Instrument Panel Cluster/Special Functions. The Air Bag indicator should turn ON and OFF as commanded.
- If the air bag indicator does not illuminate as expected, replace the IPC.
If all circuits test normal, replace the SDM.