Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: If data is not retrieved from the malfunctioning body control module (BCM), additional time will be required to program the replacement BCM.

Retrieve data from the malfunctioning BCM. Refer to CONTROL MODULE REFERENCES .
Rotate the ignition switch to the OFF position.

Fig 1: Identifying BCM Electrical Harnesses
Courtesy of SUZUKI OF AMERICA CORP.
Remove the Instrument Panel Lower Brace Bezel. Refer to INSTRUMENT PANEL LOWER BRACE BEZEL REPLACEMENT .
Disconnect the BCM electrical harnesses.

Fig 2: Identifying BCM
Courtesy of SUZUKI OF AMERICA CORP.
Remove the BCM (1) from the instrument panel (I/P) retainer:
1. Pry the BCM tabs from the locking tabs on the underside of the restraint.
2. Slide the BCM out of the retainer.