April 5, 2026: LEMON Manuals is launched! Read the announcement.

Output Gear Assembly Installation

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Reference: TRANSMISSION CASE INSPECTION

Reference: TRANSMISSION COOLER LINE SEALS INSTALLATION

Reference: ROTATIONAL TORQUE MEASUREMENT

Reference: FRONT DIFFERENTIAL BEARING RACE AND SELECTIVE SHIM INSTALLATION

Reference: MANUAL SHIFT SHAFT SEAL AND BEARING INSTALLATION

Reference: FRONT WHEEL DRIVE SHAFT OIL SEAL INSTALLATION

Reference: FRONT DIFFERENTIAL CARRIER SEAL INSTALLATION

Fig 1: Identifying Output Gear Assembly

G05470092

Courtesy of SUZUKI OF AMERICA CORP.

Rotate the transmission case so that the I.D. tag is facing up.
Install the output gear assembly (12) into the transmission case assembly.

Fig 2: Identifying Output Gear Retaining Ring And Output Gear Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Install the output gear retaining ring (48) into the output gear assembly (12) groove.
Reference: LOW AND REVERSE CLUTCH PISTON INSTALLATION