Circuit/System Verification
WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON, observe the DTC information with a scan tool.
- Record Freeze Frame and Failure Records.
- Clear DTCs.
- Operate the vehicle under the conditions observed in the Failure Records.
- Observe the DTC information with the scan tool. Verify that DTC P0706, P0707, or P0707, or P0708 does not set.
- If specified DTC sets, replace the TCM, refer to TRANSMISSION CONTROL MODULE REMOVAL procedure and TRANSMISSION CONTROL MODULE INSTALLATION procedure.