Remote Control Door Lock Receiver Replacement

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Remote Control Door Lock Receiver

Courtesy of SUZUKI OF AMERICA CORP.

REMOTE CONTROL DOOR LOCK RECEIVER REFERENCE

Callout	Component Name
Preliminary Procedure Remove the right side lock pillar upper garnish molding. Refer to LOCK PILLAR UPPER GARNISH MOLDING REPLACEMENT (LEFT SIDE) or LOCK PILLAR UPPER GARNISH MOLDING REPLACEMENT (RIGHT SIDE) .
1	Remote Control Door Lock Receiver Procedure Refer to CONTROL MODULE REFERENCES for programming and set up information. Tip: Push in on the upper two integral tabs to release the receiver from the body side.