LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> XL7 Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Security And Locks) >> Diagnostic Information and Procedures >> DTC B3265 >> Component Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Component Testing

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Liftgate Switch 

  1. Ignition OFF, disconnect the harness connector at the liftgate switch.
  2. Test for infinite resistance between the signal terminal A and the ground terminal C with the switch in the open position.
    • If not the specified value, replace the liftgate switch.
  3. Test for less than 2 ohms between the signal terminal A and the ground terminal C with the switch in the closed position.
    • If greater than the specified range, replace the liftgate switch.