Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Low Brake Fluid Level Sensor

Courtesy of SUZUKI OF AMERICA CORP.

While noting the proper orientation, install the brake fluid level indicator switch to the master cylinder.
Press the brake fluid level indicator switch firmly into the master cylinder reservoir, ensuring that the retaining tabs are fully engaged.

Fig 2: Identifying Brake Fluid Level Indicator Switch Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Connect the brake fluid level indicator switch electrical connector.
Install the underhood electrical center bracket. Refer to UNDERHOOD ELECTRICAL CENTER OR JUNCTION BLOCK BRACKET REPLACEMENT .