Circuit/System Testing
WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the harness connector at the EBCM.
- Test for less than 1.0 ohm of resistance between the ground circuit terminal 16 and ground.
- If greater than the specified range, test the ground circuit for an open/high resistance.
- Verify that a test lamp illuminates between the B+ circuit terminals listed below and ground.
- Terminal 1
- Terminal 32
- If the test lamp does not illuminate, test the B+ circuit for a short to ground or an open/high resistance.
- If the circuit tests normal, replace the EBCM.