Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Mass Air Flow/Intake Air Temperature Sensor

Courtesy of SUZUKI OF AMERICA CORP.

Install the MAF/IAT sensor seal to the MAF/IAT sensor.
Install the MAF/IAT sensor to the air cleaner assembly.
CAUTION: Refer to FASTENER NOTICE .
Install the MAF/IAT sensor screws.
Tightening torque

Tighten the screws to 4 N.m (35 lb in).

Fig 2: Identifying Engine Wiring Harness Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.
Connect the engine wiring harness electrical connector to the MAF/IAT sensor.
Install the air cleaner outlet duct. Refer to AIR CLEANER OUTLET DUCT REPLACEMENT .