LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2009 >> XL7 Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 65 (Engine Mechanical) >> Repair instructions >> Engine Mount Replacement - Right Side >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Upper Engine Mount Bracket Bolts And Right Upper Front Engine Mount Bracket Bolt
G05465182Courtesy of SUZUKI OF AMERICA CORP.
  1. Remove the air cleaner assembly. Refer to AIR CLEANER ASSEMBLY REPLACEMENT .
  2. Remove the drive belt. Refer to DRIVE BELT REPLACEMENT .
  3. Support the engine. Refer to ENGINE SUPPORT FIXTURE .
  4. Raise and support the vehicle. Refer to LIFTING AND JACKING THE VEHICLE .
  5. Remove three upper engine mount bracket bolts (1).
  6. Loosen right upper front engine mount bracket bolt (2).
    Fig 2: Identifying Upper Engine Mount Bracket Nuts And Lower Bracket Bolts
    G05465183Courtesy of SUZUKI OF AMERICA CORP.
  7. Remove the upper engine mount bracket nuts (1).
  8. Remove the lower bracket bolts (2).
  9. Remove the ABS connector clip from the frame.
  10. Remove the mount (3) and the lower bracket (4) from the vehicle.
    Fig 3: Identifying Upper Bracket Bolt
    G05465184Courtesy of SUZUKI OF AMERICA CORP.
  11. Remove the upper bracket bolt (1) from the bracket.
  12. Remove the upper bracket.
    Fig 4: Identifying Engine Mount And Lower Bracket
    G05465185Courtesy of SUZUKI OF AMERICA CORP.
  13. Remove the engine mount (3) from the lower bracket (4).
scientia non olet · About LEMON Manuals