Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Mount And Lower Bracket

Courtesy of SUZUKI OF AMERICA CORP.

Install the engine mount (3) to the lower bracket (4).

Fig 2: Identifying Engine Mount Upper Bracket And Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Install the engine mount upper bracket and bolt (1) to the engine. Do not tighten the bolt.
Install the ABS connector clip to the bracket.

Fig 3: Identifying Lower Bracket Bolts
Courtesy of SUZUKI OF AMERICA CORP.

CAUTION: Refer to FASTENER NOTICE .
Install the lower bracket bolts (2).
Tightening torque

Tighten the lower bracket bolts to 50 N.m (37 lb ft) .
Tighten the upper engine mount bracket nuts (1).
Tightening torque

Tighten the upper engine mount bracket nuts to 50 N.m (37 lb ft) .

Fig 4: Identifying Upper Engine Mount Bracket Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install the upper engine mount bracket bolts (1).
Tightening torque

Tighten the upper engine mount bracket bolts to 50 N.m (37 lb ft) .
Tighten the right upper engine mount bracket bolt (2).
Tightening torque

Tighten the right upper engine mount bracket bolt to 110 N.m (81 lb ft) .
Lower the vehicle.
Remove the engine support. Refer to ENGINE SUPPORT FIXTURE .
Install the drive belt. Refer to DRIVE BELT REPLACEMENT .
Install the air cleaner assembly. Refer to AIR CLEANER ASSEMBLY REPLACEMENT .