Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Air Cleaner Outlet Duct Clamps, Mass Air Flow And Intake Air Temperature Sensor

Courtesy of SUZUKI OF AMERICA CORP.

Install the air cleaner intake duct to the MAF/IAT sensor and the throttle body.
CAUTION: Refer to FASTENER NOTICE .
Tighten the air cleaner outlet duct clamps at the throttle body and the MAF/IAT sensor.
Tightening torque

Tighten the clamps to 4 N.m (35 lb in) .

Fig 2: Identifying PCV Tube
Courtesy of SUZUKI OF AMERICA CORP.
Install the PCV tube to the air cleaner outlet duct.
Install the fuel injector sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .