Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Wiring Harness Electrical Connector Of Mass Air Flow/Intake Air Temperature Sensor

Courtesy of SUZUKI OF AMERICA CORP.

Remove the air cleaner outlet duct. Refer to AIR CLEANER OUTLET DUCT REPLACEMENT .
Disconnect the engine wiring harness electrical connector from the mass air flow (MAF)/intake air temperature (IAT) sensor.

Fig 2: Identifying Air Cleaner Assembly
Courtesy of SUZUKI OF AMERICA CORP.
Remove the air cleaner bolt.
Disengage the air cleaner pins from the front panel and remove the air cleaner assembly.
If replacing the air cleaner assembly, remove the MAF/IAT sensor. Refer to MASS AIRFLOW SENSOR/INTAKE AIR TEMPERATURE SENSOR REPLACEMENT .