Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki XL7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Front Side Door And Bolts

Courtesy of SUZUKI OF AMERICA CORP.

With the aid of an assistant, position the front door and loosely install all hinge to body bolts.
CAUTION: Refer to FASTENER NOTICE .
Align the hinge with the marks made during the removal procedure.
Tightening torque

Tighten the hinge to body bolts to 31 N.m (23 lb ft) .
Install the front door check link. Refer to FRONT SIDE DOOR CHECK LINK REPLACEMENT .
Engage wiring harness grommet into door and install the front door wiring harness.
Connect the wiring harness connectors at the door jamb.
Verify the door is aligned properly. If door adjustment is required, refer to FRONT SIDE DOOR ADJUSTMENT .
Install the front fender. Refer to FRONT FENDER REPLACEMENT .